ENMG / TEMPERATURE CONTROLLERS
ETC9 Series
TEC temperature controllers
ETC9 temperature controllers for thermoelectric assemblies, with D07P, D15P, S07U and S15P variants. Select the exact model to match the required load, sensor and installation.
Request a quote ↗Email insteadPRODUCT PHOTOS
ETC9 Series gallery
Select a thumbnail to enlarge. Images show controller and display combinations. Confirm the controller model, display configuration and supplied accessories when ordering.
CAD & 3D
ETC9-D07P CAD & 3D model
This CAD model applies only to the exact model shown above, not to every variant in the product series.
Inspect the product in 3D and download the engineering files for your CAD workflow.
Click to load the 3D model.
Drag to rotate. Scroll or pinch to zoom.
Engineering downloads
Free download. No account required.
- STEP · 82.3 MBETC9-D07P.STEPDownload STEP
- ZIP · 16.9 MBETC9-D07P.zipDownload ZIP
Source revision: 2026-08-26 (STEP)
3D preview is for visual reference. Use the downloaded CAD file and approved drawing for design and installation.
TECHNICAL DATA / ETC9 Series
Specifications & selection.
- Series variants include ETC9-D07P, ETC9-D15P, ETC9-S07U and ETC9-S15P.
- Model-specific engineering files are available for mechanical integration.
- Controller and display combinations are shown in the product gallery; confirm the exact model and supplied accessories when ordering.
| Model | Engineering reference | Selection note |
|---|---|---|
| ETC9-D07P | 3D mechanical model; dimensional drawing | Request model-specific electrical ratings and wiring instructions |
| ETC9-D15P | 3D mechanical model | Request model-specific electrical ratings and wiring instructions |
| ETC9-S07U | 3D mechanical model | Request model-specific electrical ratings and wiring instructions |
| ETC9-S15P | 3D mechanical model | Request model-specific electrical ratings and wiring instructions |
| Item | Label / confirmed information |
|---|---|
| Model | ETC9-D15P |
| Supply input | 7–24 VDC; VIN and GND |
| TEC outputs | OUT:C1 (TEC1+, TEC1−); OUT:C2 (TEC2+, TEC2−) |
| Sensor input groups | IN:S1 and IN:S2; NTC / COM / PT markings |
| Other interface markings | UART TTL; SCREEN; STATE; ENABLE; PWM1–PWM4; BUZZER |
| Heat dissipation | Integrated finned heat sink |
Selection & installation notes
- Connection names describe the supplied product-label image. Obtain the current wiring instructions before energizing the unit.
- Confirm output current, TEC load voltage, supported sensor types, measurement range, control accuracy and installation clearances for the ordered model. These ratings are not established by the available label.
- Interface markings alone do not establish electrical levels, pinout compatibility or communication protocol.
- The 7–24 VDC supply and connections listed above are identified on the ETC9-D15P label only. Do not apply these specifications or the same dimensions to other ETC9 variants.
Based on the ENMG ETC9 controller and display product images ↗. Checked 2026-10-10. Confirm the current specification for the exact model when ordering.
TECHNICAL RESOURCES
Plan your integration.
Related ENMG cabinet environment systems brochure.
This general brochure is not an ETC9 series datasheet. Request the specification and wiring drawing for your exact ETC9 model.