ENMG / RELAY INTERFACE MODULES
RT-P-L / RT-E-L
Fused miniature relay interface modules
Compact DIN relay modules with per-channel fuses, PA-N or ENMG APAN plug-in relays and screw or spring output terminals.
Request a quote ↗TECHNICAL DATA / RT-P-L / RT-E-L
Specifications & selection.
- 4–32 output channels with NPN/PNP input options.
- 5, 12 or 24 VDC coils; 5 A relay contact class.
- -L base designation 72 mm; separate 32-channel -X MIL version.
| Spring model | Screw model | Channels | Output grouping | L × W × H (mm) |
|---|---|---|---|---|
| RT-P04M-L | RT-P04S-L | 4 | 4 points; confirm independent wiring | 38 × 87 × 50 |
| RT-P06M-L | RT-P06S-L | 6 | 3 per COM | 48 × 87 × 50 |
| RT-P08M-L | RT-P08S-L | 8 | 4 per COM | 60 × 87 × 50 |
| RT-P10M-L | RT-P10S-L | 10 | 5 per COM | 72 × 87 × 50 |
| RT-P12M-L | RT-P12S-L | 12 | 4 per COM | 84 × 87 × 50 |
| RT-P16M-L | RT-P16S-L | 16 | 4 per COM | 110 × 87 × 50 |
| RT-P32M-L | RT-P32S-L | 32 | 4 per COM | 220 × 87 × 50 |
| Model | Configuration | Outline |
|---|---|---|
| RT-P16AS-L | 16 independent screw outputs | 110 × 87 × 50 mm |
| RT-P32CS-X / RT-P32CM-X | 32 channels, MIL input, screw / spring output | 135 × 120 × 52 mm |
| RT-E**S-L / RT-E**M-L | Corresponding ENMG APAN versions | Same outline stated in official table |
| Parameter | Published value |
|---|---|
| Relay / contact | PA-N / 1a, source describes double contact |
| Initial resistance | ≤30 mΩ |
| Mechanical / electrical life | Over 20 million / 100,000 operations; test load not supplied |
| Coil / consumption | 5 / 12 / 24 VDC; 110 mW per channel, coil only |
| Operate / release threshold | ≤70% / ≥5% rated voltage |
| Operate / release time | 10 / 5 ms |
| Input protection | miniSMDC050F 500 mA resettable fuse; SMF36CA 36 V bidirectional TVS |
| Indicator | Red/green non-polarized LED |
| Parameter | Published value |
|---|---|
| Screw terminals | M2.5; 5 mm pitch; 10 A / 300 V |
| Wire / strip / torque | 22–12 AWG / 6–7 mm / 0.4 N·m |
| Withstand | 2500 VAC, 1 minute; test points not given |
| Ambient | −40 to +70 °C; 5–85% RH; no condensation or icing |
| Ingress / flammability designation | IP20 / UL94 V-0 in source |
Selection & installation notes
- The prose says four-channel products are independently wired, while the -L chart says four points per common. Confirm the exact RT-P04 wiring diagram; do not assume either connection topology.
- RT-P denotes Panasonic PA-N and RT-E denotes ENMG APAN. Double-contact and gold-plated features in the source apply only to PA-N, not automatically to APAN.
- The output fuse is 5 A / 250 V slow-blow per channel. It provides overcurrent protection, not voltage-surge suppression; verify its AC/DC breaking capacity and coordination.
- Grouped channels share terminal and PCB limits. Do not multiply a 5 A relay rating by the number of channels to determine COM capacity; confirm module current and thermal derating.
- MIL input belongs to the separately listed -X version. Confirm the full model code, wiring and production drawing before enclosure layout. Isolate power before relay or fuse replacement.
Based on the official Chinese product page and selection charts ↗. Checked 2026-09-15. Confirm the current specification for the exact model when ordering.
TECHNICAL RESOURCES
Plan your integration.
ENMG relays — English product-family brochure.
This is a product-family brochure. Request a model-specific datasheet and installation drawing with your inquiry.